Same Day Dispatch - Free Shipping Over £200

We are currently undergoing site maintenance, to make an order please contact or call 0333 880 2347.

Apologies for any inconvenience caused.

Downlight Insulation Hoods for Loft Non Fire Rated

Unsure What Products You Need?

Email In Your Plans/Pictures For A Free Airtightness Consultation.

The downlight covers are an innovative solution for achieving a safe and easy to install sealing system for downlights.



£4.39 net

In stock

SKU: AR9047

The downlight covers are an innovative solution for achieving a safe and easy-to-install sealing system for downlights.

Their fitting dramatically reduces the volume of air leakage through each downlight, therefore significantly reducing draughts and energy loss. They also ensure the maintenance of an effective moisture barrier:

  • Tested to both BS EN 60598-1 and BS EN 60598-2-2,
  • Flammability & Fire testing to UL94 and IEC 695-2-1,
  • Conforms to BS 5250 : 2011 : 3-3.

Downlight covers, tested to all necessary standards including flammability and heat resistance testing. That allows the housing of recessed lights without disrupting your homes thermal envelope and airtightness barrier.

The downlight hood is easily fitted and sealed to an air tight membrane or plasterboard using  PHS Argo Tape airtightness tape or Fortax 6400 airtightness sealant. Downlight or recessed lights are the source of a high proportion of air leakage in the home.

  1. PHS Downlights help improve the overall efficiency of your building.
  2. Allows insulation to be applied over and around recessed lights.
  3. Eliminates draughts permeating through recessed lights.
  4. Reduces noise between floors.
  5. Prevents moisture damage your building fabric in the vicinity of the light.


Gaps in ceiling insulation reduce its overall performance. Furthermore – not insulated ceiling (even 5%) usually reduce it by 50%! Finally, the downlight cover restore ceiling performance to similar level as an unpenetrated ceiling.

It allows the insulation to be continuous and uninterrupted over the whole area of the ceiling, saving energy, carbon emissions and cost.



0/5 (0 Reviews)

Technical Details

Height: 130mm
Base: 200×200 (square)
Material: Polymer
Bulb Power: 35W Max
Fire Rating: Not Applicable
Accessories: Gerband 586 Tape
Vapour & Air Tight:   Yes
Specification: BS EN 60695-2-11:2014
BS EN 60695-11-5:200BS EN 60598-1, Clause 12.4
0/5 (0 Reviews)


It is widely acknowledged that for thermal insulation to be effective, it needs to be continuous.

Gaps in ceiling insulation dramatically reduces its overall performance, typically insulation performance is reduced by 50% if only 5% of the ceiling area is not fully insulated.

The Down-lighter Hood restores ceiling performance to similar level as an un-penetrated ceiling by allowing the insulation to be continuous and uninterrupted over the whole area of the ceiling saving energy and carbon emissions and COST!

0/5 (0 Reviews)


Part No:   External: Internal: Barcode:
AR9047 200mm X 200mm X 130mm 155mm X 155mm X 130mm  05391536370251
0/5 (0 Reviews)