WhatsApp

Mon-Fri 8am – 5pm
0744 424 6115 Mon-Fri 8am – 5pm

PHS Split Release Tape

Unsure What Products You Need?

Contact us on WhatsApp

Split Release Tape, designed to be used indoors, for the airtight bonding and sealing of door and window reveals.

 

NBS

Datasheet

Application Instructions

£20.93£23.69 net

SKU: N/A

PHS 85/15 Split Release Tape is used indoors, for the airtight bonding and sealing of door and window reveals.

PHS Split Release Tape is an airtight, pliable, stretchable PE-film sealing tape with moisture-resistant polyacrylate adhesive of extremely high tack and permanent adhesion as well as outstanding ageing resistance. The 15mm strip facilitates the speedy and accurate fixing of the tape to window frame. Split release tape permits the installer to quickly apply it to the window frame and reveal in separate and manageable steps.

Advantages

  • Due to its flexibility in crosswise direction it compensates for any building movements.
  • Provides a permanent air tight and vapour seal.
  • Offers significant savings due to time advantages.
  • Is compatible with acrylic glass, as well as polycarbonates.
  • Provides high adhesion of the sealing strip on all types of window frame.
  • Contains no solvents.

 

Technical Details

Backing: Polyethylene film, UV stabilized with PET-filament reinforcement
Roll Length:  25m
Total Thickness (DIN EN 1942)*:  0.34 mm (without release liner)
Tensile Strength (DIN EN 14410)*:  >50N/25mm
Elongation at break (DIN EN 14410)*: 150% – 200%
Release Liner: Silicone paper
Types of adhesive:  Polyacrylate adhesive
Adhesion (DIN EN 1939)*: >30N/25mm
Tack: Very high
Shear strength:  Medium
Moisture resistance (GPM 812):  Permanent Resistance
Temperature range: -40 C to 80 C
Application Temperature: -10 C to 40 C , recommended at > 5 C

Application

PHS 85/15 & 45/15 tapes are used indoors for the air-tight bonding and sealing of door and window reveals.

Surfaces must be stable, dry, free of grease and dust, and must not contain adhesive-repellent coatings, some MDF and masonry surface may need a primer coating (such as PHS Primer) for best results.

The installer should firstly apply a sample of the tape and test adhesion.

Fitting Instruction

  • Cut the required length of tape; fold the tape along the split line.
  • The 15mm release liner strip is removed and the tape is applied to the window frame.
  • Removes the remaining liner and fit remaining tape the reveal detail.
  • Ensure there is sufficient stress relief on the tape, this prevent pulling on the tape and possible damage.

Sizes

Part Number: Size: Box Quantity:  Barcode:
AR9098A 45/15x 25m 10 05391536370046
AR9098B 85/15 x 25m 6 05391536370053
AR9098C 50/50 x 25m 6 05391536370060
0
    Your Cart
    Your cart is emptyReturn to Shop

    Have any questions about airtightness?

    Contact us

    WhatsApp

    Mon-Fri 8am – 5pm