WhatsApp

Mon-Fri 8am – 5pm
0744 424 6115 Mon-Fri 8am – 5pm

Gerband 586 Airtight Joint Tape For Vapour Membranes

Unsure What Products You Need?

Contact us on WhatsApp

Pliable and stretchable PE-film sealing tape with moisture-resistant, adhesive of extremely high tack.

 

NBS

Datasheet

£11.20£37.00 net

Shipping Time Quantity Discount
1-2 days 30 - 50 5%
1-2 days 51 - 100 8%
1-2 days 101 + 10%
SKU: AR9006-1

Gerband 586 Airtight Tape offers permanent adhesion as well as outstanding ageing resistance.

It is a pliable and stretchable PE-film sealing tape with moisture-resistant, polyacrylate adhesive of extremely high tack. The slight elasticity in connection with tear resistant thread reinforcement makes the Gerband 586 Airtight Tape universally suitable for achieving airtightness as well as sealing many types of surfaces.

While the PET reinforcement helps preventing over-expansion of the adhesive tape, it has a very aggressive adhesive. It even sticks at extremely low temperatures and conforms to DIN 4108-7.


As a result, our Airtight Tape might be used indoors for the airtight bonding of wind and vapour barriers. Due to its specification – you can use it in non-visible areas of building components and also on impact resistant plastics (pipes, windows), wood or metal. Finally, it is available in various sizes, from 50-150mm.




Suitable Substrates

  • Wood (especially Hard wood-based panel materials),
  • Gypsum fibreboards,
  • Plasterboards,
  • Cement fibreboards,
  • Metals,
  • Hard plastics and electric cables.


Suitable Membranes

  • Vapour control layers / retarder sheeting,
  • Smooth to rough PE/PA/PO/PP sheeting, Kraft papers, Aluminium membranes.


Application Guide

  • Gerband 586 Tape is used indorrs for the airtight bonding and sealing of penetrations and overlaps of wind and vapor barriers according to DIN 4108-7. Surfaces must be stable, dry, free of grease and dust and may not contain adhesive-repellent coating.
  • For bonding MDF boards we recommend preconditioning the surfaces with Gerband Primer.
  • We recommend bonding to surfaces such as smooth or slightly rough PE webs and non-waxed kraft paper. Aluminium sheeting, impact resistant plastic, metal and wooden sheathing may also be used.

Fitting Instructions

Membrane to Membrane

Align the membrane correctly (100mm overlap, indicated on the print of the membrane) and fit the tape evenly between the membranes. Apply pressure to ensure good adhesion.

Membrane to Steel

The steel should be dry, dust and rust free. If in doubt apply a coat of primer to the steel and let dry. Apply Gerband 586 tape equally between the membrane and the steel, apply sufficient pressure to ensure good adhesion.

Membrane to Timber

The timber should be reasonably smooth, dry and dust free. If in doubt apply a coat of primer to the timber and let dry. Apply Gerband 586 Tape equally between the membrane and the timber, apply sufficient pressure to ensure good adhesion.

Membrane to Concrete

The concrete should be smooth, dry and dust free. It is recommended that a coat of primer is applied to the concrete and let dry. Apply Gerband 586 tape equally between the membrane and prepared concrete, apply sufficient pressure to ensure good adhesion.

 

Technical Details

Base Material: LD-polyethylene foil, stretchy, green
Adhesive: Acrylate dispersion, solvent free
Adhesive middle layer: Polyester lattice layer
Covering material: Silicon paper, brown
Thickness (without covering): 0.28mm
Adhesive layer: 210g / m2
Adhesive strength: 35N / 25mm DIN EN 1939
Temperature resistance: 40C to 80C
UV resistance: Max. 3 months
Durability against ageing: Excellent
Moisture resistance: Excellent
Processing temperature: Recommended from 5C to 40C Possible from –10C

Application

  • Gerband 586 hermetic is used indoors for the air-tight bonding and sealing of penetrations and overlaps of wind and vapor barriers according to BS 9250.
  • Surfaces must be stable, dry, free of grease and dust, and may not contain adhesive-repellent coating.
  • We recommend bonding to surfaces such as smooth or mslightly rough PE webs and non-waxed kraft paper. Aluminum sheeting, PP fleece, and wooden sheathing (e.g. oriented  strand boards) may also be used.
  • For bonding MDF boards we recommend preconditioning the surfaces with Gerband Primer 6300.
  • Gerband 586 may also be used in non-visible areas of building components and also on impact resistant plastics (pipes, windows), wood or metal.

Sizes & Packaging

Part Number: Size: Box Quantity: Barcode:
AR9001 50mmX25m 12 5090019001018
AR9002 60mmX25m 10 5090029002012
AR9003 75mmX25m 8 5090039003016
AR9004 100mmX25m 6 5090049004010
AR9005 150mmX25m 4 5090419041010
0
    Your Cart
    Your cart is emptyReturn to Shop

    Have any questions about airtightness?

    Contact us

    WhatsApp

    Mon-Fri 8am – 5pm