The Access Door Ceiling Mounted panel consists of aluminium profiles with plasterboard inlay of 25mm (EI30).
Both, an outer and an inner frame of the access panel consist of four single frames, which are firmly connected due to a special welding process. Two catch wires complete the access door ceiling mounted panel. In order to avoid accidents, you should secure this safety-system after each opening.
A joint gap of 1.5 mm, visible between outer frame and door leaf and equipped with a circumferential fire-resistant seal (foaming). The concealed snap locks open the access panel when you apply pressure to the flap on the spring loaded latch side.
Particular advantages of our system
- Economical solution,
- Delivery at short notice on request,
- Quick and easy installation,
- Sophisticated solution,
- Flush installation in ceilings.CapabilitiesIn non-load bearing ceilings of the fire resistance class:
– EI30 with cladding of 12.5 mm, 15 mm, 18 mm, 20 mm or 25 mm.
Tested in accordance with the “European Norms EN 1364-2 and EN 1634-3”.Customized solutions
Customized sizes can be produced in every dimension upon enquiry.Locks
The access panel is equipped with a four-square lock and white collar
