WhatsApp

Mon-Fri 8am – 5pm

0744 424 6115

Mon-Fri 8am – 5pm

PHS Wolfy External Tape

Unsure What Products You Need?

Contact us on WhatsApp

Wind-tight tape that adheres excellently onto wood, smooth bricks and solid concrete surfaces.

Datasheet

£14.99

In stock

SKU: AR9095H

Wolfy is an external membrane tape that’s permanently resistant to moisture.

Wolfy is waterproof tape is wind-tight and temperature resistant. It also adheres excellently onto wood, smooth bricks and solid concrete surfaces. PHS Wolfy can be bonded to porous or sandy substrates sufficiently if primed and can be used as a repair tape for damage or tears in membranes. Furthermore – it seals all known pitched roof underlay and façade membranes.

Description

Wolfy is an external membrane tape that’s permanently resistant to moisture.

Wolfy is waterproof tape is wind-tight and temperature resistant. It also adheres excellently onto wood, smooth bricks and solid concrete surfaces. PHS Wolfy can be bonded to porous or sandy substrates sufficiently if primed and can be used as a repair tape for damage or tears in membranes. Furthermore – it seals all known pitched roof underlay and façade membranes.

Additional information

Technical Data

Total thickness: (DIN EN 1942)*; 0.33 mm
Tensile strength: (DIN EN 14410)*;-50 N / 25 mm
Elongation at break: (DIN EN 14410); 20%
Adhesion: (DIN EN 1939)*; -25 N / 25 mm
Temperature range: -30C to 120C
Moisture resistance: (GPM 812); Permanent resistant
Core diameter: 76.5 mm

*according to the respective DIN

Apply at temperatures from -10C to 40C,
Store in dry rooms from 5C to 25C, protected from UV-radiation,
Surfaces need to be self-supporting, dry, clean, dust-free, and free of grease and other adhesive-repellent materials,
In case of porous surfaces pre-treatment with Butyl Primer 6000 is necessary,
Apply stress-free and press to surface thoroughly, adhesion increases with higher pressure,
Not suitable for bonding under mechanical stress. Prior to the application with plastics test are necessary due to the possibility of plasticizer migration and stress corrosion. For safety reasons it‘s necessary to check the adhesion between the tape and the membrane before using.

Technical Details

Adhesive: acrylate dispersion, solvent-free EC1Plus
Adhesive coating: 230g/m2, or customized
Processing temperature: from -10 °C
Temperature resistance: -40 °C to +100 °C Storage at 15 – 25 °C with rH 40 – 60 %
Carrier material: UV-stabilised special foil
Liner: silicon paper
Adhesive strength: DIN EN 1939 ca. 35 N/25mm
Thickness: 0,30mm (without liner): DIN EN 1939 ca. 35 N/25mm 0,30mm (without liner)

Application

Detach release paper | centre on the overlap and affix | gradually peel off the release paper and adhere the tape whilst keeping it tension- and wrinkle-free | rub on firmly and vigorously | not to be used below a 10° roof pitch | maximal outdoor exposure 24 months.

The tape and/or membrane should not be exposed to any mechanical strain.

Sizes

Part Number: Sizes: Box Quantities: Barcode:
AR9095H 60mmx25m 10 0509017901701
0
    Your Cart
    Your cart is emptyReturn to Shop