0333 880 2347

info@passivehousesystems.co.uk

polish flag dot

Poland

german flag dot

Germany

irish flag dot

Ireland

Sustainability Through Excellence

0

You must have an order with a minimum of £97.00 to place your order, your current order total is £0.00.
You must have an order with a minimum of 1 pcs to place your order, your current order total is 0 pcs.

PHS Spray Sealing Foam OFFER

spray foam special offer

Price

£14.40

Buy 5 cans of PHS Spray Foam and get 6!

PHS Spray Sealing Foam has been specially developed to form an airtight, thermal & sound insulating interface between construction components.

Properties

• PHS Spray Sealing Foam adheres to all common building materials, with the exception of polyethylene, silicone, oils and greases, mold release agents, etc.
• PHS Spray Foam can be processed at temperatures from + 5 ° C to + 30 ° C.
• The hardened foam is elastic, predominantly closed-cell, rot-proof, moisture-proof, temperature-resistant from -50 ° C to + 100 ° C.
• It is resistant to aging, but not to UV radiation.
• PHS Spray Sealing Foam offers excellent thermal and sound insulation values.

Processing

• The adhesive surfaces must be free of dirt, dust and grease.
• Slightly moisten the building connection joint with a water spray.
• The optimal processing temperature is + 20 ° C to + 25 ° C.
• Shake the can thoroughly before use.
• Fill the joint no more than halfway, because the fresh foam expands to 2-3 times the initial volume.
• Foam layers thicker than 5 cm in several steps and allow each layer to harden.
• The curing of the foam is supported and accelerated by additional moisture in the substrates (moistening of the substrates).
• For all joints, moistening is recommended after each layer of foam.
• Insufficient supply of moisture or excessive moisture can lead to unwanted shrinkage of the foam.
• Never press the partially hardened foam into the joint.
• Remove fresh foam stains immediately with foam cleaner. This can only be done in the tack-free period. Hardened foam can only be removed with special cleaner or mechanically.

Application Area: Up to 45 liters
Joint-cross section approx. 10×1.5cm: Up to 13m
Cellularity: Good
Tack free time: Approx. 5-10min
Can be cut according to (20mm strand): Approx. 10-12min
Cured after (20mm strand): Approx. 12h
Processing temperature: +5C to +30C
Optimal processing temperature: +20C to +25C
Tensile strength (DIN 53430): 5-6N/cm2
Stretching (DIN 53430): Approx. 30%
Shear strength (DINF 53427): 3-4N/cm2
Strain at 10% compression (DIN 53421): 1-2N/cm2
Water absorption (DIN 53433): 1.4Vol.-%
Thermal conductivity (DIN 52612): 0.035W/mK
Air permeability: airtight up to 1000 Pa
Temp. resistance of curesd strand: -50C to +80C
Bonding: -50C to +100C
Acoustic isolation: Up to 62dB
Building materials class (DIN 4102 part 1): B3
Shelf life: 12 months

 

 

 

 • PHS Spray Sealing Foam is suitable for windows, attic conversion, doors, walls, corner joints, air conditioning and ventilation systems, pipelines, wooden structures.
• Designed to fill and seal around gaps, cracks and penetrations in the building envelope to stop air infiltration, maintain thermal integrity and reduce the transfer of noise.
• Very versatile, therefore it can be used on various substrates like masonry, pla- ster, wood, concrete, aerated concrete, bricks, clinker, plasterboards, fiberbo- ards, various plastics, corrosion protected metals, styrofoam, various other in- sulating materials, rigid foam panels, ceramics, tiles, stone.

Product Code:  Sizes:  Barcode: 
 AR9065 750ml Can 5391536370237