PHS Fasada Tape seals all common roof and facade membranes with closed and rough surfaces outdoors.
You can use this wind tight, adhesive Cloth Tape for the bonding and sealing of overlaps and joints. It is also an excellent solution for sealing round or angular penetrations of diffusion-open, or diffusion-tight roof-lining membranes in pitched roof and facade areas according to DIN 4108 part 7. Our Tape is also perfect as repairing tape for small damage or rips in roof-lining, airtight membranes. It adheres very well to wood, bricks and non-sandy concrete surfaces.
PHS Fasada Tape is very resistant against humidity and diffusion-open. Furthermore it is UV-resistant over a period of 4 months even under direct solar radiation.
Backing: Special non-woven fabric with functional coating
Thickness, backing: 0.46mm
Total thickness (DIN EN 1942)*: 0.68mm (without release liner)
Tensile strength (DIN EN 14410)*: >100N/25mm
Elongation at break (DIN EN 14410)*: 50% to 100%
Release liner: Silicone paper
Types of adhesive: Polyacrylate adhesive
Adhesion (DIN EN 1939)*: >35N/25mm
Tack: Very high
Moisture resistance (GPM 812): Permanent resistance
Temperature range: -30C to +90C
Application temperature: +5C to +40C
Color of Fabric: Anthracite
The adhesive tape may be used for the bonding and sealing of overlaps, joints, and round or angular penetrations of diffusion-open or diffusion-tight roof-lining membranes in pitched roof and facade areas according to DIN 4108 part 7. It may also be used as repairing tape for small damage or rips in roof-lining membranes.
PHS Fasada Tape is very resistant against humidity, diffusion-open, and UV-resistant over a period of 4 months even under direct solar radiation.PHS Fasada Tape may therefore be used for cold-sided bonding.
Surfaces must be dry and free of release agents like grease, oil, tensides, dirt, and dust. We recommend preconditioning porous or sandy subsurfaces with PHS Primer. PHS Fasada Tape must not be used for bonding under mechanical load. It must be bonded as tension-free as possible and pressed and rubbed adequately onto surfaces. The adhesion may be improved by applying higher pressure. Due to eventual plasticizer migration we recommend testing the product‘s suitability on plastics and rubber.
For safety reasons we generally recommend users to test the adhesion of the tape on self-chosen membranes before application.
Size: 60mmX25m 100mmX25m
Box Quantity: 10 6