EPDM membrane creates weathertight seal when used externally. An airtight seal is created when used internally to seal windows and doors to the reveal.
EPDM membrane can be bonded to a variety of substrates when used with Fasatan TFS adhesive sealant.
We distribute full adhesive, adhesive strip and non-adhesive EPDM membranes ranging in width (50 – 1500mm) and thickness (0.5 – 1.5mm).
|Reaction to fire:||Class E, EN13501-1|
|Water tightness:||Passed, EN1928|
|Water vapour permability:||50.000mu, EN1931|
|Impact resistance:||NPD, EN12691|
|Joint shear resistance:||NPD, EN12316-2|
|Tensile Strength:||>7mPa; EN12311-2|
|Elongation at break:||>300%; EN12311-2|
|Tear Resistance:||>10N; EN12310-2|
|Durability Against Ageing:||Passed, EN1296 / EN1931|
|Durability Against Alkali:||Passed, Annex C|
Surfaces must be stable, dry, free of grease and dust, and must not contain adhesive-repellent coatings. The installer should firstly apply a sample of the tape and test adhesion.
The adhesive strip EPDM is recommended for application to windows & doors. Fasatan TFS polymer adhesive is ideal for binding the membrane to the substrate.
Please observe the following instructions when bonding membranes on-site:
– check the adhesive compatibility of the subsurface
– the undergrounds must be clean, dry, solvent-, grease- and oil-free
– the seam overlap of individual sheet widths should be at least 10 cm
Please observe our technical instruction sheet specifications and the adhesive processing notes!
|AR9073B||0.8MM X 200MMX20M||05391536370244|
There are a wide range of product variants, including thickness, width and adhesive options. Please Contact Us with your desired product requirements.